Installing a washbasin with a vanity unit: 2026 price, wall-mounted, countertop, trap
indekscen.pl editorial team · published 30 September 2026 · prices according to the 5 October 2026 index
Installing a washbasin with a vanity unit in Poland costs about PLN 415 for the plumber's labour alone. Installation of the washbasin without the unit has a median price of PLN 215, and half of the price lists fall within the PLN 175 ‑ 245 range. The trap, hoses and seals are purchased separately, as are the tap and its installation.
At a glance (as at 5 October 2026)
- Installing a washbasin with a vanity unit costs about PLN 415 in labour, excluding the price of the unit and washbasin.
- Installing a washbasin alone usually costs PLN 175 ‑ 245, with a median of PLN 215, according to 4 sources collected by indekscen.pl.
- Installing a bathroom tap is a separate item, usually PLN 235 ‑ 325 each.
- The most expensive washbasin installations, involving a wall-hung basin or alterations to connections, cost up to PLN 350.

A washbasin is one of the cheaper bathroom fixture installations, but the bill can easily rise when a vanity unit, tap, trap and sometimes alterations to the connections are added. We break down the cost based on plumbers’ price lists and trade articles to make comparing quotes straightforward. Prices cover labour and exclude the washbasin, furniture and fittings.
How much does it cost to install a washbasin with a vanity unit?
Installing a washbasin with a vanity unit costs about PLN 415 in labour, according to price lists collected by indekscen.pl. This is roughly twice the cost of installing the washbasin alone, which has a median price of PLN 215. The difference is due to the work on the unit: the plumber must secure it to the wall, level it, cut openings for the trap and connections in the back panel, and only then fit the washbasin and connect the water supply.
The price usually includes connection to the water supply and drainage system. Materials are charged separately: the trap, flexible hoses, angle valves and seals, as well as travel to remote localities. Details and sources are available at washbasin installation.
How much does it cost to install a wall-mounted, countertop or inset washbasin?
Installing a countertop or inset washbasin is the cheapest option and usually falls in the lower part of the PLN 175 ‑ 245 range. The washbasin sits on an existing worktop or unit, so the plumber does not need to anchor it to the wall. A countertop washbasin does, however, require a taller tap or a wall-mounted tap, which may affect the cost of the fittings.
Installing a wall-mounted, wall-hung or undermount washbasin is more expensive and approaches the upper end of the price range, up to PLN 350. The wall must be checked for adequate load-bearing capacity, while plasterboard walls require reinforcement or a support frame.
| Installation type | Typical labour cost | Notes |
|---|---|---|
| Countertop or inset washbasin | PLN 175 ‑ 245, closer to the lower end | washbasin on an existing worktop |
| Wall-mounted or undermount washbasin | PLN 175 ‑ 245, closer to the upper end, up to PLN 350 | fixing to the wall, levelling |
| Washbasin with a vanity unit | about PLN 415 | installing the unit and cutting openings in it |
| Exposed bathroom tap | PLN 235 ‑ 325 | separate item on the bill |
How much does it cost to install a washbasin with a wall-mounted vanity unit?
Installing a washbasin with a wall-mounted vanity unit usually costs about PLN 415 in labour, the same as a set with a floor-standing unit, but it requires a sturdy wall. A wall-mounted unit, together with the washbasin and water in the trap, is quite heavy, so it is secured with anchors to a masonry wall or to reinforcement within a partition wall.
Before installation, check the height of the water and waste connections. If the waste pipe is too low, it may obstruct a drawer in the unit, requiring the pipe to be altered or a unit with a cut-out to be selected. Altering the connections is a separate job, priced in addition to standard installation.
How much does it cost to remove and install a washbasin?
Removing an old washbasin and installing a new one costs more than installation in a new bathroom, usually close to the upper end of the typical PLN 175 ‑ 245 range. The plumber must turn off the water, loosen seized valves and the trap, remove the washbasin and often replace angle valves that have started leaking after years of use. We do not have a separate median for removal alone, so ask whether it is included in the quote and whether the company will dispose of the old washbasin.
How much does it cost to install a washbasin trap?
Installing the trap with a new washbasin is part of the installation and included in the labour price, typically PLN 175 ‑ 245. The trap itself must be purchased separately. If you are only replacing the trap, for example with one fitted with a click-clack waste, the plumber will usually charge for a small job or apply a minimum call-out fee. The median price for a typical plumbing job is PLN 220.
A trap with a pop-up waste is quick to install, but it must be matched to the washbasin, either with or without an overflow. An incompatible waste is the most common reason why the plumber has to make a second visit.
How much does a plumber charge to connect a washbasin and tap?
A plumber most often charges PLN 215 to connect a washbasin and a separate PLN 275 to install a bathroom tap. If the tap is exposed and the connections are ready, installing it may be cheaper, with a median of PLN 100. A concealed tap built into the wall costs about PLN 575, as it requires chasing into the wall.
| Service | Median | Typically | Sources |
|---|---|---|---|
| Washbasin installation | PLN 215 | PLN 175 ‑ 245 | 4 |
| Bathroom tap installation | PLN 275 | PLN 235 ‑ 325 | 4 |
| Tap installation (kitchen/bathroom) | PLN 100 | PLN 83 ‑ 150 | 3 |
| Plumber (service) | PLN 220 | PLN 120 ‑ 375 | 37 |
Median and typical range from public price lists, as at 5 October 2026. Each price includes a source and quotation on the service page.
We do not add the prices of different services into a single figure. Plumbers often offer a discount when one job includes a washbasin, tap and, for example, a toilet, while some quote a fixed price for installing all bathroom fixtures. Read more about taps in our article how much a plumber charges to install a tap.
How much does a plumber cost in different cities?
Plumbers’ rates vary between cities more than the price of washbasin installation itself. For a typical plumbing job, the median is PLN 215 in Kraków, PLN 150 in Wrocław and PLN 365 in Warsaw. Local data come from fewer price lists and cover different types of work, so treat them as a guide to how much more or less expensive a given city is.
| City | Median | Typically | Sources |
|---|---|---|---|
| Lublin | PLN 90 | PLN 70 ‑ 95 | 3 |
| Wrocław | PLN 150 | PLN 135 ‑ 150 | 3 |
| Białystok | PLN 195 | PLN 140 ‑ 210 | 3 |
| Kraków | PLN 215 | PLN 160 ‑ 410 | 4 |
| Olsztyn | PLN 285 | PLN 200 ‑ 365 | 2 |
| Toruń | PLN 290 | PLN 270 ‑ 305 | 2 |
| Zielona Góra | PLN 300 | PLN 240 ‑ 400 | 3 |
| Warsaw | PLN 365 | PLN 295 ‑ 430 | 2 |
| Poznań | PLN 370 | PLN 305 ‑ 435 | 2 |
| Szczecin | PLN 550 | PLN 385 ‑ 715 | 2 |
| Gdańsk | PLN 725 | PLN 590 ‑ 865 | 2 |
| All of Poland | PLN 220 | PLN 120 ‑ 375 | 37 |
Plumber (service): cities from cheapest to most expensive. Median and typical range from public price lists, as at 5 October 2026. Each price includes a source and quotation on the service page.
What increases the price of washbasin installation?
The price of washbasin installation is increased mainly by work that is not visible in the shop photographs. According to the price lists used to calculate the median, the factors with the greatest impact are:
- Type of washbasin. Countertop and inset washbasins are cheaper to install, while wall-hung and undermount models cost more.
- Vanity unit. A set with a vanity unit costs about PLN 415, compared with PLN 215 for the washbasin alone.
- Alterations to connections. Moving the water supply or waste pipe is a separate job, often involving removing tiles and repairing them afterwards.
- Replacing the trap and tap. If the existing fittings are retained but do not fit the new washbasin, extra parts and labour are required.
- City and travel. Plumbers’ rates are higher in large cities, while companies charge extra for long journeys.
When comparing quotes, therefore, ask for an itemised price covering the washbasin, vanity unit, tap, materials and travel. Only then can you see which quote is genuinely cheaper.
How can you prepare for installation to pay less?
- Buy everything before the visit. The washbasin, vanity unit, tap, trap, two hoses and angle valves. One missing part means a second visit.
- Assemble the unit yourself. If the furniture comes flat-packed and the plumber charges by time, assembling the carcass yourself shortens the job.
- Check the height of the connections. Compare it with the unit’s technical drawing to avoid alterations.
- Combine jobs. Having the washbasin, tap and toilet installed in one job means a single call-out and often a lower price for each item.
- Ask about a leak-tightness guarantee. A good tradesperson runs the water after installation and checks the trap and connections beneath the unit.
If you are planning a larger change, such as a new shower, also see our article on shower enclosure removal and installation, or, if renovating an entire flat, how much does it cost to renovate a flat. Prices for other plumbing work and minor repairs are available in the repairs and tradespeople category.
Unlike online price lists, we show the median from multiple sources, the typical range and separate variants, such as with a vanity unit or tap, rather than a single figure from one company.
The prices in this article come from publicly available plumbers’ price lists and trade articles. Each price has a source, date and verbatim quotation on the washbasin installation page.
Frequently asked questions
How much does washbasin installation cost?
Za montaż samej umywalki hydraulicy biorą najczęściej PLN 215, typowo PLN 175 ‑ 245. Z szafką podumywalkową cena rośnie do około PLN 415.
How much does the labour cost to install a washbasin tap?
Montaż baterii łazienkowej, także umywalkowej, kosztuje zwykle PLN 235 ‑ 325 za sztukę. Prosta bateria natynkowa do gotowych przyłączy bywa tańsza, z medianą PLN 100.
How much does it cost to install a bathroom vanity unit?
Szafka podumywalkowa jest zwykle montowana razem z umywalką, a cały zestaw kosztuje około PLN 415 robocizny. Osobne szafki wiszące, na przykład lustro z szafką, fachowiec wycenia zwykle jak pojedynczy mebel, z medianą PLN 125.
How long does it take to install a washbasin with a vanity unit?
Montaż umywalki z szafką trwa zwykle od jednej do trzech godzin, jeśli przyłącza są na właściwej wysokości. Dłużej trwa składanie szafki z paczki i przeróbka przyłączy, a robocizna wynosi wtedy więcej niż typowe PLN 415.
Is fitting a click-clack waste included in the washbasin installation price?
Korek klik klak albo automatyczny montuje się razem z syfonem, więc przy nowej umywalce zwykle mieści się w cenie montażu, typowo PLN 175 ‑ 245. Sam korek i syfon kupujesz osobno.
Check prices with sources
Every amount quoted in the article has a source, date and verbatim quote from the price list on the service page.
Translation of the original Polish article dated 30 September 2026. Quotations from price lists are in Polish, as published by the companies. Read the original in Polish.
Found an error? Report it. Do you provide these services? Add your company's price list free of charge.


